The new option parts SCS-01 center universal joints for SCRT10 are made by SCM 21 material with heat treatment. The SCS-01 not only can provide no power loose also can be increase acceleration.
X2S-20 46T Spur Gear. Plastic
Hong Nor have developed a new 46T Spur Gear (Plastic) for 1/8 X1, X2 electric off-road cars.
The gear is not only suitable for Hong Nor X series buggies but also available for Kyosho and other brand cars.
It's also a perfect choice for customers who own our electric conversion kits.
This gear made with super heavy-duty material can decrease noise while increasing its performance.
No.402-BL Ultra Safe 4mm Wheel Locking Nut
We now release our new product "Ultra Safe Locking Nut" for all 1/10 scale cars.
Normally drivers use 4mm Flanged Nut to secure the wheels for all the 1/10 cars, and the nuts sometimes come off or get very lose on the tracks which also cause many problems for drivers. But now you have a new option!
The new Ultra Safe Wheel Locking Nut is machined with special design to improve its function and durability. They have qualified our stability test and never got loose during the testing.
PI-813 EFRA-2080 In-Line Tuned Pipe Set. Chrome
This pipe is homologated by EFRA for year 2010 and designed for high end competition use.
X2S-19 lightweigh 43T and 10T spiral gear set
The No. X2S-19 light weigh 43T and 10T spiral gear set is made by the same material with CNC miller to 1.5mm deep in the back to take away the weight and to lighten the gears. The 43T and 10T gears use a 30 degree design, therefore they can not be used separately. (Both gears are laser engraved for identification.)
The combination of these gears not only change the gear ratio but also provide more choice for your clutch bell.
#401Y Lightweight Inch-Up Wheels. Yellow
Hong Nor have released new lightweight Inch-Up dish wheels for 1/8 off-road buggy.
The new wheels are 2.5mm larger in diameter and 1mm larger in width (Compared with our N0.361 wheels.).
The new lightwight inch-up wheels not only provide better handling and increase acceleration but also improve faster in and out of the corner.
The new inch-up wheels are available in both white and yellow colors.
X2S-18 Lightweight 17mm Wheel Hub with Hard-Coating Treatment
#399 3-Pin Steel Flywheel
Hong Nor like to introduce to you our latest spare parts for all 1/8 Off-Road buggies. Get the advantages that some pro drivers have enjoyed for sometime now. The new Hong Nor Steel Wheel gives performance advantages in many different areas.
#401W Lightweight Inch-Up Wheels. White
Hong Nor have released new lightweight Inch-Up dish wheels for 1/8 off-road buggy.
The new wheels are 2.5mm larger in diameter and 1mm larger in width (Compared with our N0.361 wheels.).
The new lightwight inch-up wheels not only provide better handling and increase acceleration but also improve faster in and out of the corner.
The new inch-up wheels are available in both white and yellow colors.
#398 Aluminium Balls (Hard-Coate)
HongNor is now releasing the long anticipated light-weight aluminum balls with hard-coated treatment.
#394 17mm wheel Locking Nut
X2S-17 46T Lightweight Spur Gear
The No. X2S-17 light weight 46T spur gear is made by high carbon steel SCM21 material with CNC miller and is heat treated for maximum durability. This new 46T light weight spur gear will reduce the revolving mass of center differential and deliver more power to the drive line.
New In-Line Tuned Pipe EFRA-2062 (2007/06/02)
We are very proud to introduce our latest products of the new 1/8 In-Line Tuned Pipe. This pipe was homologation by EFRA for this year 2007. This new in-line tuned pipe has been designed for 3 chamber and providing an incredible high torque also can offer you a wide spectrum of RPM. Manufactured on high quality polished aluminum and Chrome Anodized finish give it looks like new forever. The new design "Billet Stinger", provide never smash the stinger end again.The pipes shape gives excellent mid-range and top end without bottom-end sacrifice. Pipe includes 2 coupler grommets, springs, and a 4mm setscrew. This pipe is very strong and fits almost all Buggys and Monster trucks .
No.389-HN Alum. Clutch Shoes (SPL Material/Red)
16mm Big Bore Shocks available!
The new 16mm Big Bore Shocks are now available. After many testing and improvements, the shocks are designed to the highest quailty and best performance.
For the convenience of first buyers, the big bore shocks are packaged as a set, two front & two rear shocks excluding the springs.
3 different shock springs (yellow-super soft, white-soft, and Nickel-hard) are also available for your choice.
Item No. #387 16mm Big Bore Shocks set
(Click "more" for photos)
X2S-10 X2 Conversion Kit
It's got all the key parts a driver needs to upgrade the car to its highest level. On top of its many new features and benefits, most of the parts in this kit such as the new graphite shock towers, radio tray, and light-weight chassis contribute to reduction of the car weight. Jammin team driver Chad Bradley's X2-CR at the 2008 World Championship weighed only 3.320 grams (about 7.3 lbs)! The new weight distribution makes the car more responsive and provides easier handling; it also helps drivers to perform flawless jumps.
New Dish Wheels for MINI CRT.5!
These new 2.2 size dish wheels are made from lighter, stronger materials which give you better speed
& handling and reduce rotational mass.
The new dish wheels come in three colors: white, yellow and orange. They not only fit our 1/12 CRT.5 truggy but are also available for all brands 1/10 scale buggy.
TMS-29W New 2.2 Size Dish Wheel, 12mm Hex Drive, (White)
TMS-29Y New 2.2 Size Dish Wheel, 12mm Hex Drive, (Yellow)
TMS-29O New 2.2 Size Dish wheel, 12mm Hex Drive, (Orange)
X2S-11 CNC Machined 7075-T6 Front 5mm Shock Tower for X2 Buggy
The new shock towers are CNC machined from a thicker 5mm aircraft grade 7075 plate and hardened to T6.
No.379 Pivot Ball Suspension System (For:X1CR)
Many of drives have asked us to manufacture a Pivot Ball Steering system to upgrade the X1-CR. We have finished production and the No.379 conversion kit and it is now available. As you can see all the parts will be available in a neatly packed package so the driver can keep all the parts together and use them when he feels the track conditions are favorable for this type of steering. The No.379 will give the drivers a lot more flexibility when more camber or castor is required. 12.15.2006
XTS-22 Titanium Turnbuckle for X1 and X2 Truggy
X1S-57 Light Weight Front Shock Tower (Multiple Position)
The new shock towers are CNC machined from a thicker 5mm aircraft grade 7075 plate and hardened to T6.
X2S-13 Light-Weight Center Universal With 3.5mm Drive Shaft
The new light-weight center universal joints are made by SCM 21 material with heat treatment. The 3.5mm shaft can also help reduce rotation inertia .
HN New 3.7' Truggy Wheels Products Release(2008.04.18)
Add these great new products to your collection of Tires & Wheels!
Hong Nor is pleased to announce the release its newest 3.7" tires, wheels and the perfect fit molded foam inserts that simply improve the cars race performance.
X1S-60 Titanium Turnbuckle for X1 and X2 Buggy
XTS-18 Light-Weight Universal Joint Set (For X2 Truggy Front/Rear)
Machined from special spring steel material.
Additionally hardened and precision ground.
Light-Weight reduced can provide fast acceleration and speed.
XTS-19 Light-Weight Universal Joint Set (For:X2 truggy Center)
Machined from special spring steel material.
Additionally hardened and precision ground.
Light-Weight reduced can provide fast acceleration and speed.
XTS-21 CNC 7075-T6 Light-Weight Chassis for X2 Truggy
Swiss made 7075-T6 aluminium material.
Precision CNC machined with high tolerances.
High-quality hard coated for durability.
50g light compared with standard chassis.
X1S-53 CNC Machined Alumimium Front
X1S-53 CNC Machined Alumimium Front "C" Hub (For:X1CR and X1CRT)
XTS-14 CNC Machined 7075-T6 Center Brace for X2 Truggy
Swiss made 7075-T6 aluminium material.
Precision CNC machined with high tolerances.
High-quality hard coated for durability.
No.380 High Downforce Wing
Hong Nor is proud to announce the new line-up of High Downforce 1/8 buggy wings. 12.25.2006
X1S-54 Two Piece Engine Mount (Hard-Coated)
HN Racing is now releasing new CNC Machined Two Piece Engine Mount for the X1CR Buggy and the X1CRT Truggy. The X1S-54 engine mount is machined from solid billet 7075 aircraft grade alloy and then silver color treated.
The X1S-54, a Two Piece engine mount that helps you change engine or clutch bell quickly without re-adjusting the bottom screws. Also you can buy X1S-54A , a separate engine mount adapter to shorten your time when changing engines.
X1S-59 Light Weight Spur Gear 48T (2007/05/30)
Hong Nor have now produced a light weight spur gear for the X1CR.
New Truggy Shock Springs
HN has recently finished development of the new Super Big Bore 16mm big bore shocks for the 1/8th line of Buggies and Truggies. The new shock springs for truggies are now available in two colors:
#390A Shock Spring, Gray (soft)
#390B Shock Spring, Blue (hard)
#380 Irresistable Hot New Products now released!
Hong Nor would like to present to you some brand new Bright Orange parts. They are pretty, high-performce products that you can't resist!
#380O - High Downforce Wing
#361O - Light Weight Dish Wheel
#289O - Dish Wheel
X1S-56 Spiral Gear 43T+13T
HN racing is now releasing new CNC Machined Spiral Gear for X1CR buggy and X1CRT truggy.
The X1S-56 Spiral Gear is machined from SCM-21 material with precision machine cut and hard treatment.
The X1S-56 Spiral Gear not only can reduce the gear noise but also provide fast acceleration and speed.
(The X1S-56 Spiral Gear also aviliable for Kyosho Mp-777; Hao Bao-H8 and Hot-Bodies Lightening...ect.)
X2S-12 CNC Machined 7075-T6 Aluminum Rear ShockTower for X2
NEW RELEASE: Antenna caps
Hong Nor now re-release the Antenna cap for receiver in two colors.
No.198-R Antenna Cap (Red)........ 8 pcs/bag
No.198-B Antenna Cap (Black)..... 8 pcs/bag
MTS-27 High Downforce Wing for Mini CRT.5 (2007.07.18)
Hong Nor is proud to announce the new line-up of High Downforce Mini CRT.5 Truggy wings.
Due to this new design, added airflow over the wing increases the downforce which in turn enhances the
rear tire traction at both low and high speeds.
The wings also suitable for 1/10 Off-Road Buggy.
The wing comes in four colors white, yellow, red and black, plus side plate decals and numbers.
XTS-20 Two-piece Center Diff. Mount
Now Release: X1X-CR Buggy and Truggy
We're pleased to announce that since X1X series is available now, the X1 cars will be discontinued. To avoid confusion, we hereby provide you a list of the standard features of X1X buggies and truggies for your reference. The prices remain the same but the kits come with better performance parts!
X2-CR PRO 1/8 off-Road Buggy
We have now completed the new X2 competition buggy and it is ready for shipping immediately. This much anticipated buggy is based on its predecessor the X1 and has some features added to it from feedback given to us by our Team Drivers, especially those in the USA.Jay Halsey from Jammin, had spent a lot of time testing and come up with this world class buggy for the 2008 World Championships. The intention was to have a very fast low weight car without sacrificing the durability of the model. The car is stronger than most models on the market as was seen at the pre-World and World Championships.
Ultra LX-1
NEW-1/8 Scale Nitro Powered 4WD Off-Road Buggy-RTR Version
X1CR Pro Version
Hong Nor is pleased to announce the release of new 1/8 Buggy called the X1CR Pro
X1CR 1/8 Scale Off-Road Buggy-RTR Version
X1CR 1/8 Scale Off-Road Buggy-RTR Version
X1CR Factory Team Edition (FTE)
X1CR Factory Team Edition-New model with more additional parts for drivers.
X1X 1/8 Off-Road Buggy
We're pleased to announce that since X1X series is available now, the X1 cars will be discontinued. To avoid confusion, we hereby provide you a list of the standard features of X1X buggies and truggies for your reference. The prices remain the same but the kits come with better performance parts!
We are very proud to introduce our latest 1/8 Off-Road Gas powered Truggy Car called the MUTILATOR.
X2CRT 1/8 Off-Road Truggy
We have now finished the production of the X2-CRT 1/8 scale Truggy
CRT.5-PBS RTR Version
We have received many requests from our customersfor a Pivot Ball Steering System to satisfy their market. The Pivot Ball front and rear end allows for more adjustments to satisfy all drivers driving styles. We have developed a special high impact and more durable nylon with better wear properties for the steering knuckles.
New-1/12 Scale Mini Truggy CRT.5 RTR Version
New-1/12 Scale Mini Truggy CRT.5 RTR version is starting to release!
NEW--1/12 Scale Mini CRT.5 Off-Road Truggy (Pro Version)
NEW--We are about to release a new and exciting 1/12 scale Mini Truggy called "The CRT.5" PRO Version. (03.25.2007)
SCRT10 1/10 Scale Electric 4WD Short Course Truck
To catch up with the fast changing R/C market, our engineers spent six months to design this new electric vehicle and test drive over and over to ensure its quality.
The SCRT10 electric powered 4WD short course truck not only provides high perfomance but is also very durable.
Megalith Monster Truck
1/8 Scale Off-Road Monster Truck
DM-One 1/7 Scale Gas Powered On-Road Car
The New Products-DM-One 1/7 Scale Gas Powered On-Road Car
X10-E
HongNor is proud to bring to you our newest 1/10 Electric On-Road sedan.
Using our years of professional expertise, we developed this brand new 4WD on-road car specially designed for beginners.
The car has great handling, runs fast, and its equipments are superior compared to other vehicles of the same category.
Both RTR kit and 80% kit are available now!
*Both kits don't include battery and charger as the batteries may cause hazardous problems during delivery.
Electric Covertion BreshlessKit
HongNor is proud to bring you the brushless conversion kits for X1-CR, X2-CR. and X2-CRT. HongNor have received many requests from consumers and distributors all over the world asking us to produce electric conversions for our top quality nitro powered cars. Therefore, after numerous testing and discussions, our newly designed brushless conversion kits are finally released. These kits can effortlessly help all HongNor owners to convert their favorite buggy and/or truggy into electric cars.
Many of you may already know that Brushless Motor, Speed Controller and Lipo Battery have entered the mature stage in their product life cycles. They can be purchased easily at your local hobby shops and there are many different brands to choose from. So these electric conversion kits will not include motor, speed controller and battery.
We have begun the production of the electric conversion kits, and they can be shipped immediately. HongNor continue to bring you the best RC quality cars and we look forward to receiving your new orders.
X2S-13 Lightweight center universal joint
The new light-weight center universal joints are made by SCM 21 material with heat treatment. The 3.5mm shaft can also help reduce rotation inertia .
All others option parts are the same as X1CR!
1/12 Scale Mini CRT.5 Pro and RTR
CNC Machined Option Parts for Mini CRT.5 PRO and CRT.5 RTR
Thermometer
Measurement Range
-24.4 to 428°F (-33 to 220°C)
Operating Range
14 to 122°F (-10 to 50°C)
Accuracy
+/-2% or 4°F (2°C)
Resolution
0.1°F (0.1°F)
Mode
Real Time Maximum Display
Features
Large LCD Display with Backlight
Battery Life
25hr Continuous Operation
Power Off Time
60 sec.
Copyright Hong Nor Enterprise Co.,LTD, Taiwan | Designed by
